供PPE 聚苯醚 NORYL HN731SE(图)
- 供应商：
- 东莞市塑大塑胶原料有限公司
- 价格：
- 请来电询价
- 联系人：
- 秦再娥
- 联系电话：
- 0769-87712676
- 传真号码：
- 0769-87712676
- 电子邮件：
- qinzaie868@126.com
- 邮政编码：
- 523000
- 公司地址：
- 广东 东莞市 樟木头镇塑胶市场一期Z栋09A号
- 商铺：
- mip.zhaozhaoqu.com/sp/9827176/
| Specific Gravity | 1.33 | 1.33 | ASTM D 792 |
| Water Absorption | 0.0600 % | 0.0600 % | 24 hrs; ASTM D 570 |
| Linear Mold Shrinkage, Flow | 0.00250 - 0.00300 cm/cm @Thickness 3.20 mm | 0.00250 - 0.00300 in/in @Thickness 0.126 in | SABIC Method |
| Hardness, Rockwell M | 88.0 | 88.0 | ASTM D 785 |
| Tensile Strength, Yield | 115 MPa | 16700 psi | SABIC - Japan Method |
| Elongation at Break | 4.00 - 6.00 % | 4.00 - 6.00 % | SABIC - Japan Method |
| Flexural Modulus | 7.94 GPa | 1150 ksi | ASTM D 790 |
| Flexural Strength | 147 MPa | 21300 psi | Flexural Stress; ASTM D 790 |
| Izod Impact, Notched | 0.580 J/cm @Temperature 23.0 °C | 1.09 ft-lb/in @Temperature 73.4 °F | ASTM D 256 |
| Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D 257 |
| CTE, linear | 24.0 - 34.0 μm/m-°C @Temperature -30.0 - 30.0 °C | 13.3 - 18.9 μin/in-°F @Temperature -22.0 - 86.0 °F | TMA |
| Deflection Temperature at 0.46 MPa (66 psi) | 125 °C @Thickness 3.20 mm | 257 °F @Thickness 0.126 in | unannealed; ASTM D 648 |