涂料助剂溶剂型耐高温流平剂5310
- 供应商:
- 常州荣冠化工有限公司
- 价格:
- 请来电询价
- 联系人:
- 陈育
- 联系电话:
- 0519-8585551
- 传真号码:
- 0519-8585551
- 电子邮件:
- hrsh2000@163.com
- 邮政编码:
- 213000
- 公司地址:
- 常州市武进区世贸中心A座2106
- 商铺:
- mip.zhaozhaoqu.com/sp/3674767/
常州荣冠化工有限公司是从事涂料助剂的公司,是德国R&G公司(德国达姆施塔特化学研究所)的化学品、涂料助剂等材料的区总代理,并在上海设立总分装车间。其中RG系列的涂料助剂尤为特出,特别是流平剂和分散剂及消泡剂,性能优异,价格适中,深受广大用户的青睐。另本公司还根据市场需求,引进其他一些涂料原材料,如:珠光颜料、铝银浆、金葱粉等化工原料,努力为客户提供更为丰富的产品和技术服务。
RG-5310是耐热的有机硅助剂,即不同于常规(聚醚改性的)有机硅助剂,在150°C/302°F到230°C/446°F间无热分解,因此在烘烤体系的再复涂时,不发生附着力损失和表面缺陷。能剧烈降涂料体系的表面张力,尤能增进底材润湿,防止缩孔。同时,增进表面滑爽性和光泽。较之硅油,这些助剂是“用户安全的”,但在大量使用前,应通过一系列实验以确认这些助剂是否稳定泡沫。此外还需评估
其再涂性和缩孔倾向。
RG-5310is a heat-resistant silicone additive, that is, unlike conventional (polyether modified) silicone additive, at 150 ° C/302 ° f to 230 ° C/446 ° f without thermal decomposition, so baking system when applied without loss of adhesion and surface defects. Sharp lower the surface tension of paint systems, You Neng improve substrate wetting and prevents cratering. At the same time, enhance the surface smooth and shiny. Compared to silicone oils these additives are "consumer safety", but prior to use, through a series of experiments to see if these additives stabilize foam. In addition to assessing the recoatability and cratering.
(Note: above 150 ° C/302 ° f when roasting a regular silicone, these defects are generated by breaking it. )
WELCOME!