ERM-MUX 光纤波分复用器

供应商:
上海凯润计算机网络系统有限公司
价格:
请来电询价
联系人:
张超 
联系电话:
021-61504972 
传真号码:
021-60947418 
电子邮件:
779289378@qq.com 
邮政编码:
200061 
公司地址:
中山北路1715号浦发广场E座2110A、B室 
商铺:
mip.zhaozhaoqu.com/sp/788522/

详细介绍

  • 品牌/型号:ctc/ERM-MUX/PLUS
  • ,
  • ,
  • CPU redundancy (1+1)

    ? E1 redundancy (2+2)

    ? Power redundancy (1+1) [AC+AC, DC+DC, AC+DC]

    ? DCE plug-in card types
    * 6-channel o card
    * 6-channel 2W/4W E&M card
    * 6-channel FXS card
    * 6-channel FXO card
    * 6-channel RS-232 card (low speed)
    * 5-channel X.50 card
    * 4-channel G.703/64K-CO card
    * 4-channel V.35 card (n*64K)

    ? Drop & Insert function

    ? NMP, SNMP and Web based management

    ? EMS system supported

    ? Compliance with ITU-G.703, G.704, G.706, G.732, and G.823.

    Specifications

    G.703 E1 I/O Specifications

    Framing:Unframed / Framed; CCS(PCM31) / CAS(PCM30); CRC4 On/Off
    Bit rate2.048Mbps±50 ppm
    Line codeAMI / HDB3
    Line impedance75 ohm, unbalanced (BNC)
    120 ohm, balanced (RJ-45)
    Relative receive level 0 / -43dB
    Transmit level
    Pulse amplitudeNominal 2.37V ±10% for 75ohm
    Nominal 3.00V ±10% for 120ohm
    Zero amplitude: ±0.1V
    Transmit frequency trackingInternal timing±30 ppm
    Loopback timing±50 ppm
    External timing±100 ppm
    Jitter performanceording to ITU-T G.823
    Complies withITU-T G.703, G.704, G.706 and G.732.
    Interface connectorsBNC for unbalanced; RJ-45 Connector for balanced

    I/O Specifications

    ? Bridge module - 2 channels

    ? 10BASE-T/100BASE-TX, Full Duplex or Half Duplex

    ? 10BASE-T/100BASE-TX, Full Duplex or Half Duplex

    ? IEEE 802.3x flow control

    ? Real-time filtering with 256 address tables

    ? Automatic address learning, aging and deletion after 5 minutes

    ? Up to 340 packet-buffering capacity

    ? Forwarding and filtering rate at wire speed with through put latency of 1 frame.

    ? Auto padding of undersized packets to meet the minimum packet size requirement

    ? Buffering modes can be selected ording to the setting of WAN and LAN line speeds

    ?  interface has automatic Twisted Pair polarity correction

    LAN

    StandardFully compliant with IEEE 802.3/802.3u
    ConnectorShielded RJ-45
    Speeds10BASE-T/100BASE-TX, Full or Half Duplex
    FramesSupports 64 to 1522 byte packet lengths, standard and extended length frames for VLAN tagging, etc.

    Sub-E1 I/O Specifications

    ? Each card provides two E1 loops, each loop provides E1A/E1B channel
    independently

    ? Hot-Swappable

    ? Each first E1 loop may provide external clock to be used as system clock source

    FramingFramed CCS(PCM31) / CAS(PCM30)
    CRC checkCRC4 On/Off
    Bit rate2.048Mbps ±50 ppm
    Line codeAMI / HDB3
    Line impedance75 ohm, unbalanced / 120 ohm, balanced
    Relative receive level0 / -43dB
    Transmit level 
    Pulse amplitudeNominal 2.37V ±10% for 75ohm
    Nominal 3.00V ±10% for 120ohm
    Zero amplitude ±0.1V
    Jitter performanceording to ITU-T G.823
    Complies withITU-T G.703, G.704, G.706 and G.732
    Interface connectorsBNC for unbalanced
    RJ-45 Connector for balanced
    Loopback typeRemote digital loopback

    Other I/O Specifications

    N x 64 Module, 4 channels, High Speed Data Interfaces)

    Interfaces typesRS-530, X.21, V.35, RS-449 and RS-232
    Interface connectorHD68 Female with appropriate cable adapter.
    Line codeNRZ
    Data rateN x 64kbps, where N equal 1 to 31 in CCS and N equal 1 to 30 in CAS

    Async Module, 6 channels, <= 38.4kbps Async or 6 channels, 64/128kbps Sync

    免责声明:此产品由该企业自行上传维护,内容的真实性、准确性、合法性由发布企业负责,找找去对此不承担任何保证责任!
    其他产品
    移动版 | 电脑版 |